This post is sponsored by Velvet Finishes, however all opinions are 100% mine.
I’m ashamed to tell you how long I’ve had this chair sitting in the garage ready to be made over. I’ll say it’s been the better part of a year at the least. It was one of those purchases that went like this:
It’s $10! I can’t pass it up for $10!
But you don’t need it Jenna.
I know that. But it’s $10!!!
You don’t need it.
$10.
Make a smart decision, Jenna.
Ok. I’m buying it.
Said conversation was between myself and myself of course.
So since I really had no clue what to do with it or where I would put it, it just sat for a while. And then one day, I got a wild hair and decided I would attempt to paint the upholstery on this piece rather than re-upholstering it since I’d never tried painting it before. I only had $10 to lose. Here’s how it turned out…

Not half bad! I didn’t set out for it to turn out so preppy / Kate Spade-ish, but I think it works with the chair pretty well. Here’s what I did…
Polka Dot Chair Makeover
Affiliate links may be contained in this post.
What I Used:
- Velvet Finishes Handsome
- Velvet Finishes Glamorous
- Velvet Finishes Minimalistic
- Medium Sized Pouncer
- Good Paintbrush
- FrogTape
- Fine Grit Sandpaper
Step 1
The upholstery of this piece was not in great condition. It looked like a cat had maybe clawed around the edges a bit, so I cleaned up that with some scissors first.

After that, I actually got out my shop vac and vacuumed really well in all the nooks and crannies of the upholstery since I knew I was going to paint it.
Step 2
After vacuuming, I painted the wood portions of the chair with Velvet Finishes Handsome.

Handsome is the same color I used on my kitchen cabinets. It’s a classic navy shade. I just used my paintbrush and painted right onto the wood. If you have a really shiny finish to begin with, you can prime your piece with Ready, which is a simple to use spray primer, before painting it. If you don’t have a shiny finish, then you usually won’t need a primer with Velvet Finishes. I did two coats of Handsome.
Step 3
I let the Handsome dry overnight, then the next day, I tackled the upholstery. First, I taped off around the woodwork so I wouldn’t get any paint there, then I just slapped on some Glamorous with my paintbrush.

It took about four coats of paint on the upholstery, which I expected since I knew the upholstery would absorb so much of the paint.
Step 4
After the upholstery dried it was a little bit “tough” so to speak. Kellie had told me that sanding it with a fine grit sandpaper would loosen it up.

So that’s what I did. I lightly sanded over all the upholstery with about a 150 grit sandpaper. It made the upholstery feel less “tough” and more like a faux leather type upholstery.
Step 5
After sanding, I thought the chair was a little boring – it needed some pattern or something to make it pop, so I added in polka dots.

I just used a medium sized pouncer and Minimalistic and randomly placed polka dots all over the upholstery.

And all of a sudden, it became an incredibly cute chair.
You can still see some of the upholstery’s pattern through the paint, but unless you are painting plain fabric, I think that’s gonna happen.

The pillow is from Target – it’s the first purchase for the Circus’ new room at the 70’s Landing Pad. It went with the chair perfectly, so I couldn’t resist not using it in the photos.
What do you think of the preppy polka dotted chair?

You know you don’t wanna miss any of this crazy.
Sign up to get my posts delivered to your inbox here.
Stalk Me Here:
Pinterest / Facebook / Twitter / Instagram
Disclosure: This post was a collaboration with Velvet Finishes, however all opinions and hoarding of chairs I don’t need are 100% mine.


















